Skip to content

Noisefighters MRX-PRO

Rated 0 out of 5
(be the first to review)


NOT compatible with a PVS-14

In Stock

SKU: NF-MRX100 Category:


**The MRX-PRO is only compatible with devices with a mini-MUM rail and IS NOT compatible with a PVS-14. Select the AX14-PRO for a PVS-14**

The Noisefighters MRX-PRO™ is a lightweight dovetail interface monocular arm for the FLIR® Breach, Infiray® MH25, Sionyx® OPSIN, MUM-14, and similar devices which use the MINI-RAIL or MUM-RAIL method of mounting, produced with cutting edge manufacturing and material technologies. The MRX-PRO requires a dovetail helmet mount such as the Wilcox G24.

The MRX-PRO weighs only 0.8 oz / 24 g total, or approximately 58% less than a milspec J-Arm, yet it is significantly more rigid due to the unique design. Just attach a monocular, snap the complete assembly into an industry-standard dovetail helmet mount, and enjoy. An intuitive, friction-based mechanism allows users to swing their monocular in front of either the left or right eye and perfectly adjust for interpupillary distance.

The MRX-PRO includes a knuckle that is integrated into the arm which allows the entire monocular to both swing away from the eye temporarily and, when not in use, tightly stow against the helmet, significantly lessening the chance for damage during movement under doorways or out of vehicles. This knuckle is supplemented with metal washers for smooth and consistent movements. To be clear, the articulating knuckle permits full range of motion and tight stowing on both the left and right side.

The mechanism is pre-tensioned at the factory and should never need to be adjusted, but a simple hex key wrench may be used for adjustment as necessary.

A set screw helps position the monocular eyepiece close to one's eye and provides excellent compatibility for those with larger helmets.

The choice of a high performance polymer from Arkema® produces a nearly indestructible monocular mount. The highly impact-resistant material chosen for the MRX-PRO should absorb shocks and bounce back into shape instead of fracturing when dropped, bent, or otherwise stressed.

A tether (or dummy cord) attachment point is featured on the rear of the MRX-PRO to keep the entire system secure.

Noisefighters offers a no-questions-asked, transferable lifetime warranty. The Noisefighters MRX-PRO is proudly made and assembled in the U.S.A. and was designed by a Marine Corps combat veteran of Iraq and Afghanistan.


Additional information

Weight .5 lbs
Dimensions 4 × 4 × 4 in


There are no reviews yet.

Leave a customer review
Back To Top